Your laptop or computer will be the source, and your projector or display will be the destination. Once you’ve completed the setup, you can start projecting content on the screen. You may also be able to find this information on the website for the projector or display. You’ll need to check the manual for your projector or display to find out how to connect. A standard HDMI cable should be able to plug into any device that has a HDMI port.Īfter you’ve connected the cable, you’ll want to plug the other end of the cable into the projector or display. For the most part, this is an easy process. Note: Please make sure that the video card in your system is able to connect to two displays and that there is a compatible video connector to attach to the display being used.The first step is to plug the HDMI cable into the device you want to project. To connect audio when using a VGA or DVI video cable, connect a 3.5mm audio cable (headphone jack) to the “audio out” of the PC, then plug the other end to the “audio in” port on the back of the display.
If there is still no display on a projector use the remote control to change the input source. Then use a video cable to connect from the back of the PC to the back of the display.Įnable/activate the laptop's external monitor option if it is not done automatically by pressing the Win key + P key to bring up the display configurations, and select a configuration.
This could include a VGA, DVI, HDMI or DisplayPort video out port. Locate the video out port on the laptop or PC. Solution home Projector General Questions How to connect a projector to your PCĬonnect a projector to a PC or laptop using the following instructions.
0 kommentar(er)
